SNAPPY’s quality Cabinet Maker’s Set is manufactured at close tolerances to fit the precision Festool® Centrotec® chuck found on most Festool® drills, including the very popular Festool® CXS Cordless Drill. Combines the shank from the Festool® Centrotec® system, designed for reduced runout, with the proven performance of Make it Snappy Tools. Includes each of the countersinking tools required to install #5, #6, #8 and #10 screws plus two self centering hinge bits. Always use a Hex Shank Socket (Part #42001) to protect the shank from damage when replacing twist drills or use the Bench Mount Shank Wrench (Part #92881) for easier bit changes. Features Gold Screw Countersinks that drill the pilot hole and countersink or counterbore in one easy step. Simply countersink to drive the head of the screw flush with or slightly below the surface. The 82 degree countersink angle matches the angle on the head of most wood screws. Easily control the depth using an optional stop collar. Made if thru-hardened steel for long cutting life. Snappy’s signature gold set screw will scurely hold the twist drill. Easily adjust the pilot depth or replace a dull bit by simply loosening the large, hardened set screw.FeaturesGold Screw Countersinks: 3/32″, 7/64″ and 1/8″ pilot with 3/8″ counterbore; 9/64″ pilot with 1/2″ counterboreSelf-Centering Hinge Bits: 7/64″ and 9/64″Each countersink tool includes replaceable HSS twist drill for drilling pilot holeIncludes precision milled 3″ long driver bit with hardened #2 Square Drive Insert and 1/8″ Hex KeyEngages Centrotec® chuck for extremely close axial alignment of bit and output shaft of drillReduced run-out and maximum torque transfer between drill and bit
For current pricing, click “Get Details”