Three jigs in one. Cut long angle on a workpiece perfect and consistent tapers or rip a straight edge on rough-sawn lumber.
A built-in adjustment system allows you to remove the exact amount of material you need to form the desired “footprint” on the bottom end of the leg. Once the jig is adjusted you can cut four identical tapers in a matter of minutes . And with two simple hold-downs clamping a workpiece you can make long angled cuts safely and accurately. Finally these same hold-downs can be used when ripping a straight edge on a piece of rough-sawn lumber.
What you get:
- 4 printable (digital) pages of step-by-step instructions
- 30 full-color photos and illustrations
- Step-by-step instructions for using the jig