The FastCap Powerhead Wood Screws – #10 x 2-1/2″ – 50 Piece is a essential addition to any workshop looking for Hardware & Fasteners solutions.
Under $50 – Perfect for stocking stuffers, hand tools, small accessories
Product Description
You know how easy it is to overdrive a screw and drive it too deep, especially when working with MDF or particleboard! PowerHead Screw’s unique design completely eliminates this problem while offering two installation options! Above the surface: Drill the PowerHead into position so that the entire head sits on the surface of your material. Below the surface: In combination with an impact driver drill, the PowerHead Screw has been engineered with nibs underneath the large 9/16″ head to cut through your material and allow your screw to sit perfectly flush with the material surface. The type 17, self-drilling auger point allows these screws to be driven into most woods without a pilot hole, and wide threads provide greater holding power. #8 gauge; zinc plated; 9 TPI.Special under head nibsLarge 9/16″ headSquare driveType 17 self drilling auger pointZinc plated
Product Dimensions:
Length: 4.40 IN X Width: 7.20 IN X Height: 2.55 IN Weight: 0.93 LB
Note: We do not display prices to ensure you always see the most current Woodcraft pricing upon click.
