Product Description
With the unique outboard turning feature the Laguna Revo 1216 Midi Lathe allows turning ofwood blanks up to 16″. Three speed ranges are easily changed using the front access door – with no tools needed. A magnetic closure holds the door shut. Simply rotate the handle 90deg to elevate the motor and lower the pulleys and then adjust the belt position. Turn the handle back to re-tension. Once a speed range (low, mid or high) is selected, you can dial into the exact speed you want using the silver knob. The bright blue digital display shows the selected speed. The green (on) and red (off) buttons are big and easy to press. A forward-reverse toggle button allows you to change the direction of rotation. A 24-position indexing plate allows the headstock to rotate in 15deg increments. The headstock and tail stock accept an MT2 taper. A drive center and live center are included. The PWM (Pulse Width Modulation) motor utilizes transistors for fast communication between the motor and controller. PWM controls stabilize the RPM and provide consistent torque (voltage) when using speeds at low RPM so you can turn with confidence at any speed on the Laguna Revo 1216 Midi Lathe EVS. Includes lathe, face plate, drive center, live center, center knock out rod and face plate wrench. Features Bright blue digital display Forward and reverse rotation Pulse Width Modulation (PWM) motor provides consistent torque at low speeds Simple speed change with front belt access and dial in knob MT2 taper on both spindle and tail stock Specifications Motor: 1 HP DC Permanent Magnet Motor Controller: Pulse Width Modulation (PWM) Electrical Requirements: 110V-1PH-60HZ Recommended Breaker Size: 110V – 15 AMP Speed Range: 650 – 3500 RPM (high), 325 – 1750 RPM (mid), 50 – 525 RPM (low) Distance Between Centers: 15.5″ (394mm) Swing Over Bed: 12-1/2″ (318mm) Swing Over Banjo: 9-1/2″ (241mm) Max. Outboard Swing: 16″ (406.4mm) Spindle Bore: 3/8″ (9.5mm) Spindle Taper: MT2 Spindle Thread: 1″x 8 TPI (both ends) Indexing: 24 positions with Lock Drive belt Tail stock quill travel: 2-1/2″ (63.5mm) Tail stock taper: MT2 Floor to bed height: 6.7″ (170mm) Floor to Spindle Center: 13″ (328.75mm) Bed Length 29.4″ (746.8mm) Tool Rest Length: 6″ (152.4mm) Tool Rest Post Diameter: 1″ (25.4mm) Faceplate Diameter: 3″ (76.2mm) Certification: CSA C/US 256540 Overall Size: 29.4″ L x 8.9″ W x 17.4″ H (746.8mm x 226mm x 442mm) Net Weight: 118 lb. (53.5kg) Shipping Weight: 125 lb. (56.7kg) Shipping Dimensions: 35.8″ L x 14.6″ W x 20.5″ H
For current pricing, click “Get Details”
