Product Description
The Laguna 15|24 REVO lathe provides more power and capacity in a constrained space while plugging into a standard 110V outlet (15 Amp service required). The headstock, banjo and tailstock are fully removable from the bed. The tailstock features on-board tool storage for the live center and drive center (included). A tool shelf mounts to the left of the headstock with storage for the knockout bar and other lathe tools. The headstock can be repositioned to the tail end of the bed for outboard turning. A 24-position indexing plate allows the headstock to rotate in 15deg increments. The headstock and tail stock accept an MT2 taper. Precise Position adjusts the spur drive for the ideal point-to-point alignment between the drive center and the drive center. This simple adjustment of 4 screws and minor manipulation of the drive center brings your 15|24 lathe into ideal alignment for turning. The PWM (Pulse Width Modulation) motor utilizes transistors for fast communication between the motor and controller. PWM controls stabilize the RPM and provide consistent torque (voltage) when using speeds at low RPM so you can turn with confidence at any speed on the Laguna REVO 15|24 Lathe. Adjustable legs allow you to set the height of the 15|24 lathe at just the right height. Leveling feet provide micro adjustments to properly level the lathe. Upgrade your 15|24 REVO Lathe with a wheel system to move it around the shop (#172166, sold separately), a 20″ steel extension that fits in two positions for increased spindle or turning capacity (#172165, sold separately) or an LED Lathe Lamp featuring Chameleon hot/cold to configure perfect work lighting for your shop (#172167, sold separately).
Features: World-class fit and finish Sliding headstock for ergonomic outboard bowl turning 24-position indexing plate allows the headstock to rotate in 15deg increments Infinite electronic variable speed from 50 – 4200 RPM with a 3 step pulley Extraordinary torque even at low speeds, powered by Pulse Width Modulation Adjustable-height legs for a more ergonomic working position Steel bed provides strength, stability and a surface that the banjo will glide across smoothly Patent-pending Precise Point allows you to dial in the tailstock quill to meet with the headstock center
Specifications: Electrical: 1.5HP, 110V, 8 Amp, 60 Hz Recommended Breaker: 15 Amp Motor: Permanent Magnet DC, 2150 RPM PWM: Pulse Width Module Speed Control Spring Loaded Spindle Lock Swing Over Bed: 15-1/2″ Swing Over Banjo: 11-3/32″ Max. Outboard Swing (with optional accessory): 25″ Tool Rest Post Size: 1″ Tool Rest Length: 12″ Spindle Taper: MT#2 RPM: 650-4200 (High); 325-2100 (Mid); 50-650 (Low) Tailstock Quill: 4-1/2″ Self-Ejecting Floor to Spindle Center: 36.4″ – 51.4″ Floor to Bed Min.: 28.6″ – 43.6″ Spindle Index #: 24 w/ Lock Distance between Centers: 24″ Headstock/Tailstock Through-Bore: 3/8″ Headstock Travel: Full Length Spindle Size: 1-1/4″ X 8TPI RH Footprint: 60″ W x 22″ D x 56″ H Shipping Dimensions: 52″ L x 22″ W x 22″ H Net Weight: 288 lb. Shipping Weight: 302 lb.
What’s Included: (1) Laguna 15|24 Lathe (1) Banjo (1) 12″ Tool Rest (1) Drive Center (1) Live Center (1) Faceplate (1) Face Plate Wrench (1) Knock Out Bar
For current pricing, click “Get Details”
