The Mercury Adhesives CA Glue Accelerator – 12 oz Aerosol Spray is a essential addition to any workshop looking for Glues & Adhesives solutions.
Under $50 – Perfect for stocking stuffers, hand tools, small accessories
Product Description
There are two types of accelerators (aka kickers) used by consumers: acetone-based, and heptane-based. Acetone-based accelerators are the fastest, but they create a very exothermic reaction that can boil the CA and cause bubbles to form in the glue, which is called blooming. Acetone-based accelerators will also eat into paint and other finishes, not to mention blistering the skin if it contacts flesh. Mercury Adhesives uses heptane as its base. It has a slightly slower reaction, but is far less exothermic – so no blooming or blistering. When used in conjunction with Mercury Flex products, Mercury’s accelerator will create a purely crystalline depth to the finish. It also is foam and paint friendly. Features: Heptane-based CA glue accelerator Used for normal curing of cyanoacrylates Deposits a correct balance of neutralizing ions on the surface, stimulating attrition for the adhesive and preparing the surface for bonding Safe for any substrate Backed by Mercury’s 100% unconditional guarantee Made in the USA Specifications: Color: Clear Size: 12 ounce aerosol spray can Cure Speed: < 5 seconds Cured Performance is dependent on the adhesive viscosity. Low viscosity being faster to set < 5 seconds and higher viscosity < 10 seconds, gels dependent on techniques < 30 seconds
What’s Included: (1) Mercury Adhesives – CA Glue Accelerator – 12 oz Aerosol Spray
Product Dimensions:
Length: 2.65 IN X Width: 2.65 IN X Height: 7.85 IN Weight: 0.9900 LB
Note: We do not display prices to ensure you always see the most current Woodcraft pricing upon click.
