Drill straight holes all the time! With the Milescraft DrillMate you can drill straight or angled holes, drill on the edge of a board or even round stock. The drive shank attaches to your 3/8″ or 1/2″ power drill while the keyed output chuck works with most 3/8″ drill accessories. The all-metal construction DrillMate provides the precision of a drill press with the ease of a hand drill. Smooth operation and controlled drilling via spring and bearings prevent cutting tool from hitting workpiece. Adjustable depth-stop makes repetitive drilling to any depth with near drill press precision. The metal base has a scale with easy to read angles, V-grooves for centering of round materials, and holes for permanent mounting for special fixture applications. Features: Self-centering drill guide base allows for drilling accurate angles and depths Adjustable depth stop for drilling holes to a precise depth V-groove for drilling on round stock Easy to read scale permanently cast into aluminum base Drill stand base is formed for exact centering on round or flat edges Non-slip TPE feet prevent slipping and marring on the work surface Mounting holes for mounting with screws when needed Spring action controls the rate of drill penetration and return Plunge rods interlock with metal base for secure angle drilling Auxiliary handle for controlled movement Specifications: Material: Metal and plastic Keyed Chuck: 3/8″ (compatible with most 3/8″ drill accessories) 3/8″ Chuck Thread: 3/8″ x 24 thread Spindle Shaft Diameter: .47″ Spindle Shaft Length: 3.66″ Drill Bit Clearance: Maximum 7.50″ Base Dimensions: 5.5″ x 4.25″ Base Opening: 3.50″ Compatiblity: drive shank attaches to your 3/8″ or 1/2″ power drill Fixed Angle Settings: 45deg, 60deg, 75deg and 90deg What’s Included: (1) Milescraft – DrillMate Portable Drill Guide Notes: Not intended for use with impact drivers or hammer drills.
For current pricing, click “Get Details”