The RIKON Gouge Grinding Jig for 82-1005 – Pro Sharpening System is a essential addition to any workshop looking for Power Tool Accessories solutions.
Under $50 – Perfect for stocking stuffers, hand tools, small accessories
Product Description
The RIKON Gouge Grinding Jig for 82-1005 – Pro Sharpening System holds woodturning gouges for sharpening bevels at consistent, repeatable angles and shape with your bench grinder and the PRO Sharpening System. Adjusts 40deg, so setting bevels to grind on your tools is easy. Jig’s clamp firmly holds tool shafts 3/16″ to 1-3/8″ thick and up to 1-9/16″ wide. Ideal for sharpening spindle and bowl gouges, roughing gouges, and for maintaining their cutting edges – from simple bevels, to side ground variations, to the traditional fingernail shape. Features: For use with the 82-1005 PRO Sharpening System Setting bevel angles for sharpening is done by adjusting the System’s Long Arm in-or-out of the base. Final adjustments can be then made by adjusting the angle of the grinding attachment with the side wing nut Popular “Fingernail” shaping of gouges is done by simply moving the tool left and right on the grinding wheel to increase the tool’s bevel further back from the tools tip, to along the sides of the gouge Made of steel with large brass top tightening knob Adjusts 40 degrees so beveling your tools is easy
What’s Included: (1) RIKON Gouge Grinding Jig for 82-1005 – Pro Sharpening System
Product Dimensions:
Length: 11.60 IN X Width: 5.12 IN X Height: 2.56 IN Weight: 1.7500 LB
Note: We do not display prices to ensure you always see the most current Woodcraft pricing upon click.
