The Selby Pop-Up Table Mechanism is a essential addition to any workshop looking for Hardware & Fasteners solutions.
Under $200 – Great for mid-range hand tools, router bits, safety gear
Product Description
Need your tabletop closer? Build in a Selby Pop-Up Table Mechanism. This spring-assisted Pop-Up Tabletop Mechanism moves your tabletop 17″ laterally and 6-7/8″ higher than your existing tabletop with a light push. When you’re done, just push it back into place.This Pop-Up Table Mechanism is designed to fit into typical leg and apron or casework bases. This single piece unit requires simple installation. The bottom can be screwed into cleats or a full panel within the tabletop. A counter balance within the table may be needed, depending on your unique construction. The mechanism should be attached so that the upper bars are centered in the base.The top part of the mechanism connects with screws to your tabletop. The tabletop must be at least 20 pounds.Ideal for creating custom coffee tables, laptop desks, snack tables and more.Caution: Mechanism is packed with springs compressed. Use caution when removing packaging materials and tape upon arrival.Dark brown baked epoxy finishSquare tubular frameMinimum opening size: 19-7/16″ x 23-25/32″Top Weight: 20 lb. minimum to 24 lb. maximumLateral Travel: 17″Height Extension: 6-7/8″ above tabletop; 10-1/2″ overallWeight: 12 lb.
Product Dimensions:
Length: 25.50 IN X Width: 20.50 IN X Height: 4.00 IN Weight: 12.5700 LB
Note: We do not display prices to ensure you always see the most current Woodcraft pricing upon click.
