The System Three S-1 Clear Penetrating Epoxy Sealer – Quart is a essential addition to any workshop looking for Finishing solutions.
Under $200 – Great for mid-range hand tools, router bits, safety gear
Product Description
System ThreeS-1 is a two-part clear, penetrating, waterproof, epoxy sealer. It is completely waterproof and suitable for use above and below the waterline. If you are doing any kind of outdoor project or build – boat or Adirondack chair, sealing the wood prior to assembly or even after means the wood will move less and water will be less likely to get underneath the finish, which will prevent mold and mildew from growing and destroying your finish and wood. Trust us, Spar Varnish and any outdoor rated finish is not enough, so do what savvy boatbuilders do and put this down first. Your finish and furniture will last a lot longer.
Features: Simple 1:1 mix ratio Ready-to-use viscosity, no thinning required Excellent wetting properties on most surfaces Long pot life Waterproof Strong adhesion to most substrates with minimal surface preparation Remains flexible in cold temperatures No sanding required between coats up to 24 hours Resistant to salt air and water, and mild acids, alkalis, chemicals and solvents
Specifications: Size: Quart Color: Clear Mix Ratio by Volume (Resin: Hardener): 1:1 Mixed Ratio by Weight (Resin: Hardener): 100:94 Mixed Viscosity: 42 CPS Type: Two-part epoxy sealer Interior/Exterior Use: Recommended Use: Solids by Volume: 50% Application Method: Brush, roll or spray Application Temperature Range: 60degF to 90degF Maximum Service Temperature: -4degF to 160degF Pot Life @ 70degF: 24 hours Dry Time – Tack-free @ 77degF: 4-6 hours Dry Time – Recoat Without Sanding @ 70degF: 12-24 hours Dry Time – Full Cure @ 77degF: 7 days Coverage (wet) @ 250 microns (10 mils): 75 sq.ft. VOC: 650 g/L Clean Up: lacquer thinner or denatured alcohol
What’s Included: (1) S-1 Clear Penetrating Epoxy Sealer – Part A – Epoxy Resin – 1 Pint (1) S-1 Clear Penetrating Epoxy Sealer – Part B – Hardener – 1 Pint
Product Dimensions:
Length: 4.05 IN X Width: 3.80 IN X Height: 6.55 IN Weight: 2.3950 LB
Note: We do not display prices to ensure you always see the most current Woodcraft pricing upon click.
