Product Description
The TrueTrac Universal Saw System gives you the capabilities and precision of a big table saw in a compact package that you can carry to the yard or jobsite with ease. Just attach it to your existing circular saw – right or left side – and get started. Use any circular saw with a 6-1/2 to 8-1/4″ diameter blade. With the 8′ Combo Kit, you can rip 4′ x 8′ panels length-wise or trim the side edges of doors. Also great for straightening the crooked or waned edges of boards up to 8′ long. The rugged 1/8″ thick track won’t sag even with the 48″ extension in place. Makes straight, precise cuts every time. Hang the flat track from a peg or hook in your shop. Easy to transport. The TrueTrac can fit in the trunk or back seat with room to spare. The Adapter Plate positions your saw on top of the guide track instead of against it. As a result, the sacrificial edge of the poly-vinyl track strip marks the cut position precisely without factoring. Once the chamfered edges of the Adapter Plate grooves are dropped over the mating chamfered edges of the track rails, there’s zero play between them so your saw cannot wander away from the edge of the track and ruin your cut. The weight of your saw keeps every cut on track and precisely positioned. With the TrueTrac Universal Saw System, you can: Turna hand-held circular saw into a track saw system Uses any circular saw with a 6-1/2 to 8-1/4″ diameter blade Crosscut multiple boards at the same time Rip narrow boards like a table saw Bevel the edges of sheet goods or individual boards Shave thin strips off workpiece edges to produce precise widths – down to a mere 1/32″ Cut tapered shapes for cabinet fillers and similar projects Eliminate rough or waned edges easily Includes: One 57″ track Two 57″ length anti-chip strips, installed on track UniversalSaw Adapter Plate Hardware packet (6 bolts, 6 nuts, L-shaped hex wrench) Setup Jig Zero Clearance Block Installation instructions Note: Circular Saw not included
For current pricing, click “Get Details”